cmm kronos

Guide-ways protected by bellows on all axes

Large measuring volumes with wide front and side access for loading operations

Rack and pinion drives to optimise gantry handling operations even with long strokes

  • Guide-ways protected by bellows on all axes

  • Large measuring volumes with wide front and side access for loading operations

  • Rack and pinion drives to optimise gantry handling operations even with long strokes

cmm BRIDGE | kronos

Bridge CMMs for measuring large mechanical parts without the need for specially constructed foundations.

CMM bridge | kronos

Its robust construction and the protection system of covers and bellows, allows the KRONOS series to operate in several production environments, ranging from metrology rooms to manufacturing areas.

This CMM is equipped with a portable lever unit formanual control of motorised motions (Arkey).

CMM kronos

General features

The KRONOS is also available in the NT, version, which features an innovative silicon carbide ram for enhanced metrological performances.

Features and benefits
  • Moving alloy bridge frame on granite table machine base with isostatic supporting system
  • Z ram made of micro-machined alloy extrusion or Silicon Carbide (NT)
  • Mixed rack and pinion drives with zero-hysteresis friction drive for smooth and repeatable operations
  • Measuring system with high-resolution linear transducers (0.1 μm)
  • Multi-sensor temperature compensation system complete with part temperature probe
Environment
  • Temperature range for metrological specification:
    – T1:
    Ambient temperature: 18 ÷ 22 °C
    Maximum hourly gradient: 1,0 °C/h
    Maximum daily gradient: 2,0 °C/24h
    Maximum volume gradient: 0,5 °C/m
    – T2:
    Ambient temperature: 16 ÷ 26 °C
    Maximum hourly gradient: 1,0 °C/h
    Maximum daily gradient: 5,0 °C/24h
    Maximum volume gradient: 1,0 °C/m
  • Operating temperature: 15 ÷ 35 °C
  • Operating relative humidity: 40 ÷ 80 % (non-condensing)
  • Allowed vibrations: (Acceleration between peaks)
    30 mm/s2tra 1 e 10 Hz
    15 mm/s2 tra 10 e 20 Hz
    50 mm/s2 tra 20 e 100 Hz
Supplies
  • Minimum air supply: 6 Bar -79PSI
  • Air consumption: 160Nl/min
  • Power supply voltage: 230 V ± 10%; 50 Hz ± 2% single-phase
  • Maximum power consumption: 10A 1600W
Probes and measuring heads
  • Manual probe heads: MIH, MH20, MH20i
  • Motorised indexable probe heads: PH10T, PH10M, PH10MQ
  • Point to point trigger probes: TP2, TP20, TP200
  • Analogue contact probes: Analogue scanning contact probe SP25
  • | Laser probes: Metris LC/XC series (qualification sphere included)
  • Stylus and probe changers: fully automatic changing stations
Performance data

All Coord3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard

 

KRONOS NT 20.15

The services indicated are valid under the following conditions: 
– PH10M/PH10MQ/PH20/TP20/TP200: Ø4mm stylus length 10mm
– PH10MQ/SP25: SM1, stylus Ø 5mm x 50mm
– L= measuring length in mm
– Ambient temperature conditions: 
T1 : 18÷22 °C; Degrees max: 1,0 °C/h – 2,0 °C/24h – 0,5 °C/m
T2: 16÷26°C; Degrees max: 1,0 °C/h – 5,0 °C/24h – 1,0 °C/m

[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum permissible point gripping error according to ISO 10360-2
[3] Maximum Permissible Error of scanning point gripping according to ISO 10360-4 standard for SP25M / SP80 probes

 

KRONOS NT 13.10 – 15.13

Le prestazioni indicate sono valide nelle seguenti condizioni: 
– PH10M/PH10MQ/PH20/TP20/TP200: Ø4mm lunghezza stilo 10mm
– PH10MQ/SP25: SM1, stilo Ø 5mm x 50mm
– L= lunghezza di misura in mm
– Condizioni di temperatura ambientale: 
T1 : 18÷22 °C; Gradienti max: 1,0 °C/h – 2,0 °C/24h – 0,5 °C/m
T2: 16÷26°C; Gradienti max: 1,0 °C/h – 5,0 °C/24h – 1,0 °C/m

[1] Massimo Errore Permissibile su misure di lunghezza secondo la norma ISO 10360-2
[2] Massimo Errore Permissibile di presa punto secondo la norma ISO 10360-2
[3] Massimo Errore Permissibile di presa punto in scansione secondo la norma ISO 10360-4 per tastatori SP25M/SP80

Options
  • Passive vibration isolation system
  • Active vibration isolation system (AVM)
  • Multi-wire cables
  • Pallet loading/unloading system,  manual or automatic
  • PC and printer
  • Training c/o Coord3 Centres or resellers
  • Installation by Coord3 personnel or resellers
  • Models and sizes:
    COORD3 KRONOS CMMs are available with the following measuring strokes (Y.Z mm):
    13.10/15.13/20.15
request a visit from one of our agents
We care about your data! Find out how we treat them in our privacy policy
measuring machines
coord3
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.

Strada Statale 25, n°3 – 10050 – Bruzolo (To) – Italy

TECHNICAL ASSISTANCE
service@coord3.com 

COMMERCIAL SUPPORT
info@coord3.com 

ADMINISTRATION
finance@coord3.com

PURCHASING OFFICE
acquisti@coord3.com 

© 2023 COORD 3 S.R.L. | Via XX Settembre, 26 – 00187 Roma (RM) - Italy | REA C.C.I.A.A. N. 1667509 Roma - Capitale sociale versato: Euro 50.000,00 | P.IVA\C.F: 11287420019 | SDI ZBGTBLC | ISO 9001 Certified | Privacy Policy  | Cookie Policy