cmm horizontal | swan si
Horizontal arm measuring system with longitudinal X guide fixed to the ground ("Runway" architecture)
CMM horizontal | swan si
The SWAN SI series offers a technically advanced and cost-effective solution for the dimensional inspection of thin-walled sheet metal or plastic components typical in the automotive industry.
SWAN SI CMMs have air bearings on both the X-axis and Z-axis that ensure a high-performance, high-precision result. The X-axis guide is located on the side of the cast iron or granite support surface.
The lightweight and sturdy moving carriage constructed entirely of light aluminum alloy and the double mechanical guideway system with recirculating ball bearings on the X spar ensure reliability, precision and speed of measurement.
The SWAN SI can be installed on a pneumatic vibration isolation system for use in manufacturing settings, without the need for a dedicated machine foundation.
swan yes
general features
Features and Benefits
- Measuring System with Linear Optical Transducers
- Motion control through servo motors D.C.
- Sliding guides with air bearings on Y and Z axes, precision guidance on X axis
- Mechanical-type head balancing with safety brake
Environment
- Temperature: (20 ± 2) °C
- Temperature gradient: 1 °C/hour - 2 °C/day - 0.5 °C/m
- Acceptable vibrations:
30 mm/sec2 between 1 and 10 Hz
15 mm/sec2 between 10 and 20 Hz
50 mm/sec2 between 20 and 100 Hz
Feeds
- Minimum supply pressure: 0.55 MPa
- Air consumption: 90 Nl/min (14 l/min at 0.55 MPa)
- Supply voltage: 230 V 50 Hz
- Power Consumption: 10 A 1400 W
Options
- Cast iron or granite countertop
- Models and dimensions
COORD3 SWAN SI CMMs are available with the following measuring strokes (Y.Z mm):
10.12 /10.15/10.18 /10.20
12.15 /12.18 /12.20
15.15 /15.18 /15.20
request a visit from one of our agents
measuring machines
coord3
We have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional inspection, surface reconstruction and reverse engineering since 1973.
COORD3 measurement machines and software are used by small, medium and large companies around the world to certify and improve the quality of their products. COORD3 boasts a range of CMMs that includes more than 35 automatic and manual models, from the inexpensive benchtop CMM for inspecting small parts to some of the largest Gantry CMMs ever produced.
COORD3 CMMs are in active service in aerospace, defense and heavy industry and make us proud, every day, of our work.
Strada Statale 25, No. 3 - 10050 - Bruzolo (TO) - Italy
TELEPHONE
+39 011 963 5511
TECHNICAL ASSISTANCE
service@coord3.com
SALES
info@coord3.com
ADMINISTRATION
finance@coord3.com
PURCHASING
acquisti@coord3.com