ARES HAVE A LOW OVERALL HEIGHT, LOWER THAN MOST CMMS ON THE MARKET, AND ARE ALSO AVAILABLE WITH A LOW-SECTION STAND TO REDUCE THE OVERALL HEIGHT BY AN ADDITIONAL 100 MM.
This feature makes the Ares the ideal solution for control laboratories with low ceilings.
ARES CMMs can be supplied in manual or CNC configuration, with the option to upgrade a manual unit to a full CNC version at a later date.
Two levels of performance are available:
ARES: for standard applications
ARES NT: for performance with higher requirements. ARES NT has a silicon carbide Z-axis column that increases the overall rigidity of the measurement platform. This outstanding CMM system for high-precision metrology applications uses the full range of Renishaw scanning technologies.
ARES is available in 500 mm and 700 mm deck width versions and undoubtedly stands out as the ideal CMM for workshops.
Ultra-rigid alloy frame to ensure maximum rigidity for scanning applications
Structure with rapid thermal diffusion for changes in environmental conditions
FEA-designed bridge girder extrusion, allowing optimal moment of inertia for minimal deflection at high accelerations
M8 threaded table that fits into the large checkerboard layout.
Rigid air bearings for high bearing clearance coefficients
Pneumatic counterbalancing of the Z-axis.
Free-fluctuation resolution measurement scales of 0.1 micron incorporating dynamic signal processing.
Fully digital motion control with probe path fusion for optimal performance
Friction reducers with near-zero hysteresis on all axes
Passive vibration damping system that isolates external vibrations
Free access to the measurement area from all sides
Maximum positioning speed: 517 mm/sec
Maximum acceleration: 1730 mm/sec2
Silicon carbide Z-axis column further reinforcing rigidity
OptionalRenishaw TONiC resolution measurement scalesof 0.1 micron
Dynamic wireless temperature compensation system including part temperature sensor.
Temperature rating: 20 °C
Metrological temperature range: 18 – 22 °C
Temperature gradient: 0.5 °C/hour – 2 °C/day – 0.5 °C/meter
Operating temperature range : 15 – 35°C
Relative humidity: 40 – 80% (without condensation)
Acceptable vibrations: 30 mm/sec2 1-10 Hz | 15mm/sec2 10-20 Hz | 50 mm/ sec2 20-100 Hz
Minimum air supply: 5 bar
Air consumption: 100 Nl/min
Supply voltage: 230 V 50 Hz or 110 V 60 Hz (+/- 2% single phase)
Low power consumption: 10 A 1200 W (1600 W on larger models)
Laser scanning sensor
Wireless dynamic thermal compensation of the machine and components
Pneumatic vibration isolation system
Modular parts locking kit
Models and dimensions
COORD3 ARES CMMs are available with the following measuring strokes (X.Y.Z mm):
7.5.5
7.7.5 / 10.7.5 / 12.7.5
7.7.7 / 10.7.7 / 12.7.7
From consulting to support, COORD3 offers tailored services to ensure consistent performance and ongoing support over time.
© 2025 COORD 3 S.R.L. | Via XX Settembre, 26 – 00187 Roma (RM) – Italy
REA C.C.I.A.A. N. 1667509 Roma – Capitale Sociale versato: Euro 50.000,00
P.IVA/C.F: 11287420019 | SDI ZBGTBLC
ISO 9001 Certified | Quality Policy | Privacy Policy | Cookie Policy
