THE JUPITER IS A RELIABLE HIGH-PERFORMANCE CMM FOR DIRECT USE IN MANUFACTURING DEVELOPED SPECIFICALLY FOR BODY AND SUBASSEMBLY INSPECTION APPLICATIONS.
The JUPITER CMM is track-designed and is available in single- or double-arm configurations. It is fully encapsulated to provide thermal insulation from environmental changes and includes protection from contamination from the shop floor.
The open recessed structure, walkable guards protecting X-slide, and fully fairing structure ensure maximum accessibility to the measuring area and simplify loading/unloading operations, as well as enabling use directly in production areas.
High dynamics and superior precision distinguish this CMM, which can be installed flush with the plant floor and is equipped with floor guide liners as standard.
Air bearings for both the Y and Z axes are the key elements for a high-performance measurement solution. In the double-arm configuration, the measuring volumes of the two horizontal arms overlap by 100 mm to enable complete measurements of the entire structure.
Measuring System with Linear Optical Transducers
Motion control through servo motors D.C.
Slideways with air bearings on the Y and Z axes, and recirculating ball bearings on the X axis
Mechanical-type head balancing with safety brake
Temperature: (20 ± 2) °C
Temperature gradient: 1 °C/hour – 2 °C/day – 0.5 °C/m
Acceptable vibrations:
30 mm/sec2 between 1 and 10 Hz
15 mm/sec2 between 10 and 20 Hz
50 mm/sec2 between 20 and 100 Hz
Minimum supply pressure: 0.55 MPa
Air consumption: 150 Nl/min (23 l/min at 0.55 MPa)
Supply voltage: 230 V 50 Hz
Power Consumption: 10 A 1400 W
Cast iron or granite countertop
Linear thermal compensation
Models and dimensions
JUPITER COORD3 CMMs are available with the following measuring strokes (Y.Z mm):
14.20 / 14.25 / 14.30
16.20 / 16.25 / 16.30
From consulting to support, COORD3 offers tailored services to ensure consistent performance and ongoing support over time.
© 2025 COORD 3 S.R.L. | Via XX Settembre, 26 – 00187 Roma (RM) – Italy
REA C.C.I.A.A. N. 1667509 Roma – Capitale Sociale versato: Euro 50.000,00
P.IVA/C.F: 11287420019 | SDI ZBGTBLC
ISO 9001 Certified | Quality Policy | Privacy Policy | Cookie Policy
