THE STURDY STRUCTURE AND COMPLETE STRUCTURE PROTECTION SYSTEM THROUGH GUARDS AND GUSSETS ENABLE THE KRONOS SERIES TO OPERATE IN VARIOUS TYPES OF PRODUCTION ENVIRONMENTS, FROM THE METROLOGY ROOM TO MANUFACTURING ENVIRONMENTS.
This CMM is equipped with a portable lever unit for manual control of motorized movement (Arkey).
The KRONOS series is also available in NT version, equipped with the innovative Silicon Carbide spindle for even higher metrological performance.
Aluminum alloy moving carriage structure with integrated granite top
Generously sized Z spindle made of light aluminum alloy or Silicon Carbide (NT)
Mixed rack-and-pinion and hysteresis-free clutch drive system for smooth and repeatable movement
Measurement system with high-resolution linear transducers (0.1 µm)
Multi-sensor automatic temperature compensation system, with part temperature probe
Temperature range for metrological specifications:
– T1:
Ambient temperature: 18 ÷ 22 °C
Maximum hourly gradient: 1.0 °C/h
Maximum daily gradient: 2.0 °C/24h
Maximum gradient in volume: 0.5 °C/m
– T2:
Room temperature: 16 ÷ 26 °C
Maximum hourly gradient: 1.0 °C/h
Maximum daily gradient: 5.0 °C/24h
Maximum gradient in volume: 1.0 °C/m
Operating Temperature: 15 to 35 °C
Relative humidity for operation: 40 to 80 % (non-condensing)
Allowable vibration: (Peak/peak acceleration)
30 mm/s2between 1 and 10 Hz
15 mm/s2between 10 and 20 Hz
50 mm/s2between 20 and 100 Hz
Pressure: 6 Bar -79PSI
Air consumption: 160Nl/min
Power supply: 230 V ± 10%; 50 Hz ± 2% single phase
Absorption: 10A 1600W
Manual Heads: MIH, MH20, MH20i
Indexable Motorized Heads: PH10T, PH10M, PH10MQ
Point-to-point touchers: TP2, TP20, TP200
Analog keyers: SP25 scanning analog keyer
Laser sensors: LC/XC series (including qualification sphere)
Probe and tip changing systems: Automatic changing stations
Passive Antivibration System
Active vibration damping system (AVM)
Multi-wire wiring
Manual/automatic pallet loading/unloading system
PC and Printer
Training at Coord3 center or agents
Installation by Coord3 staff or agents
Models and dimensions:
COORD3 KRONOS CMMs are available with the following measuring strokes (Y.Z mm):
13.10/15.13/20.15
From consulting to support, COORD3 offers tailored services to ensure consistent performance and ongoing support over time.
© 2025 COORD 3 S.R.L. | Via XX Settembre, 26 – 00187 Roma (RM) – Italy
REA C.C.I.A.A. N. 1667509 Roma – Capitale Sociale versato: Euro 50.000,00
P.IVA/C.F: 11287420019 | SDI ZBGTBLC
ISO 9001 Certified | Quality Policy | Privacy Policy | Cookie Policy
