THE MCT NT SERIES FEATURES AN INNOVATIVE MECHANICAL DESIGN THAT ENSURES METROLOGICAL PERFORMANCE IS MAINTAINED OVER TIME WHILE REDUCING THE COST OF PERIODIC CALIBRATIONS.
The MCT NT is also available in the NT LIGHTconfiguration, that is, a CMM equipped with a light aluminum alloy Z spindle and x-axis “Single Read” system.
Main crossbar y made of light aluminum alloy for maximum rigidity and minimum moving mass
Silicon Carbide Z spindle: the use of this material ensures exceptional performance in terms of rigidity and thermal stability
Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.
“Dual Read” system on both X-spars, enables maintenance of excellent metrological performance up to cross sections of 2500 x 1800 mm
Spars (X-axis) with controlled expansion
Optical lines with high resolution free expansion system (0.1µm)
Can be equipped with a complete fairing and bellows system on the main movable structure (X / Y axes)
Temperature range for metrological specifications:
Ambient temperature: 18 ÷ 22 °C
Maximum hourly gradient: 1.0 °C/h
Maximum daily gradient: 2.0 °C/24h
Maximum gradient in volume: 1.0 °C/m
Operating temperature: 15 to 35 °C
Relative humidity for operation: 40 to 80 % (non-condensing)
Allowable vibration: (Peak/peak acceleration)
30 mm/s2 between 1 and 10 Hz
15 mm/s2 between 10 and 20 Hz
50 mm/s2 between 20 and 100 Hz
Pressure: 5.5 Bar
Air consumption: 150Nl/min
Power supply:
230 V ± 10%; 50 Hz ± 2% (single-phase)
115 V ±10%; 60 Hz ± 2% (single-phase)
Manual Heads: MIH, MH20, MH20i
Indexable Motorized Heads: PH10T, PH10M, PH10MQ, PH20, REVO
Point-to-point touchers: TP2, TP20, TP200
Analog keyers: SP25M
Laser Sensors: Perceptron Laser Scanner
Probe and tip changing systems: Automatic changing stations
Multi-wire wiring
Manual/automatic pallet loading/unloading system
PC and Printer
Training at Coord3 center or agents
Installation by Coord3 staff or agents
Models and dimensions:
COORD3 MCT NT CMMs are available with the following measuring strokes (Y.Z mm):
20.10/20.15/25.18
From consulting to support, COORD3 offers tailored services to ensure consistent performance and ongoing support over time.
© 2025 COORD 3 S.R.L. | Via XX Settembre, 26 – 00187 Roma (RM) – Italy
REA C.C.I.A.A. N. 1667509 Roma – Capitale Sociale versato: Euro 50.000,00
P.IVA/C.F: 11287420019 | SDI ZBGTBLC
ISO 9001 Certified | Quality Policy | Privacy Policy | Cookie Policy
