MCT PLUS IS THE LINE OF LARGE PILLAR CMMS FOR INDUSTRIAL METROLOGY APPLICATIONS.
The special construction structure, “Dual Drive” and “Dual Read” drive system on the stringers, limit structural deformation during movement, ensuring the achievement of excellent metrological performance.
GANTRY MCT PLUS systems stand out in inspections of large components, such as marine engines and marine transmissions, structures used an aeronautics, rotors and components for nuclear and thermal power plants, and wind turbine components.
Generous pad spacing sizing for optimal mechanical rigidity
X and Y axes with pinion/rack drive system for efficient movement of main axes
X-beams with large cross-sectional area made of stabilized steel and equipped with support system on the abutments that allow linear expansion without stress and induced deformation
Measurement system with high-resolution (0.1µm) linear transducers and “Dual Reader” and “Dual Drive” system on longitudinal X axis
Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.
Temperature rating: 20 °C
Temperature range: 18 – 22 °C
Maximum hourly gradient: 0.5 °C/h
Maximum daily gradient: 2 °C/24h
Maximum gradient in volume: 0.5 °C/m
Operating temperature: 15 to 35 °C
Relative humidity for operation: 40 to 80 % (non-condensing)
Allowable vibrations:
30 mm/s2 between 1 and 10 Hz
15 mm/s2 between 10 and 20 Hz
50 mm/s2 between 20 and 100 Hz
Pressure: 5 Bar
Air consumption: 100 Nl/min
Power supply: 230 V 50 Hz or 110 V 60 Hz (± 2% single phase)
Maximum power consumption: 10 A 1200 W
From consulting to support, COORD3 offers tailored services to ensure consistent performance and ongoing support over time.
© 2025 COORD 3 S.R.L. | Via XX Settembre, 26 – 00187 Roma (RM) – Italy
REA C.C.I.A.A. N. 1667509 Roma – Capitale Sociale versato: Euro 50.000,00
P.IVA/C.F: 11287420019 | SDI ZBGTBLC
ISO 9001 Certified | Quality Policy | Privacy Policy | Cookie Policy
