THE MCT SL SERIES OFFERS MEDIUM TO LARGE GANTRY CMMS THAT ARE NOTABLE FOR THEIR EXCELLENT STRUCTURAL STABILITY AND ADAPTABILITY.
They can be configured according to the requirements of any measurement application and are available in a wide range of sizes.
The MCT StarLight is also available in NT configuration , that is, a CMM equipped with a light aluminum alloy Z spindle and x-axis “Single Read” system.
Generous pad spacing sizing for optimal mechanical rigidity
High-rigidity Y main crossbar with unique tubular steel design
Z spindle made of extruded aluminum alloy provides rigidity and minimizes the moment of inertia.
X-beams with large cross-sectional area made of stabilized steel and equipped with support system that allow linear expansion without induced deformation
High-strength epoxy resin X/Y axis slideways ground (roughness 0.4 mm)
Measuring system with high-resolution(0.1µm) linear transducers with “Dual Reader” system on longitudinal X axis
“Dual Drive” system on longitudinal X axis (optional, standard for Y=3000 stroke)
Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.
Temperature range for metrological specifications:
Ambient temperature: 18 ÷ 22 °C
Maximum hourly gradient: 1.0 °K/h
Maximum daily gradient: 2.0 °K/24h
Maximum gradient in volume: 0.5 °K/m (SL NT) – 1.0 °K (SL)
Operating temperature: 15 to 35 °C
Relative humidity for operation: 40 to 80 % (non-condensing)
Allowable vibration: (Peak/peak acceleration)
30 mm/s2 between 1 and 10 Hz
15 mm/s2 between 10 and 20 Hz
50 mm/s2 between 20 and 100 Hz
Pressure: 6 Bar
Air consumption: maximum 300 Nl/min
Power supply:
230 V ± 10%; 50 Hz ± 2% (single-phase)
115 V ±10%; 60 Hz ± 2% (single-phase)
Manual Heads: MIH, MH20, MH20i
Motorized Heads: PH10M, PH10MQ
Indexable Motorized Heads: PH20, REVO
Point-to-point touchers: TP2, TP20, TP200
Analog keyers: SP600, SP25M, SP80
Probe and tip changing systems: Automatic changing stations
Multi-wire wiring
Models and dimensions:
COORD3 MCT STARLIGHT CMMs are available with the following measuring strokes (Y.Z mm):
20.20/25.18/25.20/30.20/30.25
From consulting to support, COORD3 offers tailored services to ensure consistent performance and ongoing support over time.
© 2025 COORD 3 S.R.L. | Via XX Settembre, 26 – 00187 Roma (RM) – Italy
REA C.C.I.A.A. N. 1667509 Roma – Capitale Sociale versato: Euro 50.000,00
P.IVA/C.F: 11287420019 | SDI ZBGTBLC
ISO 9001 Certified | Quality Policy | Privacy Policy | Cookie Policy
