THE SWAN L SERIES OF CMMS WITH A HORIZONTAL ARM INSTALLED ON RAILS (TRACKS) ALLOWS THE MACHINE TO BE INSTALLED FLUSH WITH THE FACTORY FLOOR.
Its floor-mounted rail covers allow control of large, heavy parts resting either on a separate floor or on a ground-mounted or automated system.
“Console” architectures with integral workpiece table are extremely modular and easy to configure, providing flexibility and programmability typical of CMMs with the speed and intuitive use of traditional measuring gauges.
Measuring System with Linear Optical Transducers
Motion control through servo motors D.C.
Sliding guides with air bearings on each axis
Mechanical-type head balancing with safety brake
Temperature: (20 ± 2) °C
Temperature gradient: 1 °C/hour – 2 °C/day – 0.5 °C/m
Acceptable vibrations:
30 mm/sec2 between 1 and 10 Hz
15 mm/sec2 between 10 and 20 Hz
50 mm/sec2 between 20 and 100 Hz
Minimum supply pressure: 0.55 MPa
Air consumption: 100 Nl/min (17 l/min at 0.55 MPa)
Supply voltage: 230 V 50 Hz
Power Consumption: 10 A 1400 W
Cast iron work surface
Linear thermal compensation
Models and dimensions
COORD3 SWAN L CMMs are available with the following measuring strokes (Y.Z mm):
12.15 / 12.18 / 12.20
15.15 / 15.18 / 15.20
From consulting to support, COORD3 offers tailored services to ensure consistent performance and ongoing support over time.
© 2025 COORD 3 S.R.L. | Via XX Settembre, 26 – 00187 Roma (RM) – Italy
REA C.C.I.A.A. N. 1667509 Roma – Capitale Sociale versato: Euro 50.000,00
P.IVA/C.F: 11287420019 | SDI ZBGTBLC
ISO 9001 Certified | Quality Policy | Privacy Policy | Cookie Policy
