cmm horizontal | jupiter

Horizontal arm measuring system with Longitudinal x guide attached to the floor (“runway” structure) with mobile arm Equipped with fairing

CMM horizontal | jupiter

JUPITER CMMs are reliable, high-performance machines designed for direct use in production areas and developed specifically for body and subassembly inspection applications.

JUPITER CMMs are mounted on tracks and available both in single and dual arm versions. They are totally encapsulated to guarantee thermal insulation, and feature a system that prevents contamination from the workshop floor.

Their open built-in structure, the walkable covers that protect the X guideways and the fairing that protects the entire structure ensure maximum accessibility to the measuring area and simplify part loading and unloading operations, in addition to being designed for direct use in production areas.

These CMMs, which may be installed with Flush-floor level equipped with walkable covers as a standard feature, stand out for their high dynamics and metrology performances.

The air bearings mounted on both the Y-axis and the Z-axis are the key element of this high-performance measurement solution. In the dual arm configuration, the measurement volumes of the two horizontal arms overlap by 100 mm in order to allow for measurements the entire structure.

CMM jupiter

General features
Features and benefits
  • Measuring system with optical linear transducers
  • Motion control thanks to DC servomotors
  • Air bearing guides on Y and Z axes, recirculating ball bearings on X-axis
  • Mechanical head balancing with safety brake
  • Temperature: (20 ± 2) °C
  • Temperature gradient: 1 °C/hour – 2 °C/day – 0,5 °C/m
  • Acceptable vibrations:
    30 mm/sec2 tra 1 e 10 Hz
    15 mm/sec2 tra 10 e 20 Hz
    50 mm/sec2 tra 20 e 100 Hz
  • Minimum air supply: 0.55 MPa
  • Air consumption: 150 Nl/min (23 l/min at 0.55 MPa)
  • Power supply voltage: 230 V 50 Hz
  • Maximum power consumption: 10 A 1400 W
Performance data

All COORD3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard

  • Cast iron or granite surface plate
  • Linear thermal compensation
  • Models and sizes
    Le COORD3 JUPITER CMMs are available with the following measuring strokes (Y.Z mm):
    14.20 / 14.25 / 14.30
    16.20 / 16.25 / 16.30
request a visit from one of our agents
We care about your data! Find out how we treat them in our privacy policy
measuring machines
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.

Strada Statale 25, n°3 – 10050 – Bruzolo (To) – Italy





© 2021 COORD 3 S.R.L. | Via XX Settembre, 26 – 00187 Roma (RM) - Italy | REA C.C.I.A.A. N. 1667509 Roma - Capitale sociale versato: Euro 50.000,00 | P.IVA\C.F: 11287420019 | SDI C1QQYZR | ISO 9001 Certified | Privacy Policy  | Cookie Policy
Powered by BECAUSE web design marketing & SEO