All Coord3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard
The services indicated are valid under the following conditions:
– PH10M/PH10MQ/PH20/TP20/TP200: Ø4mm x stylus length 20mm
– PH10MQ/SP25: SM1, stylus Ø 5mm x 50mm
– L= measuring length in mm
– Ambient temperature conditions:
T : 18÷22 °C; Degrees max: 1,0 °C/h – 2,0 °C/24h – 0,5 °C/m
[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum permissible point gripping error according to ISO 10360-2
[3] Maximum Permissible Error of scanning point gripping according to ISO 10360-4 standard for SP25M / SP80 probes
MCT NT LIGHT
The services indicated are valid under the following conditions:
– PH10M/PH10MQ/PH20/TP20/TP200: Ø4mm x stylus length 20mm
– L= measuring length in mm
– Ambient temperature conditions:
T : 18÷22 °C; Degrees max: 1,0 °C/h – 2,0 °C/24h – 0,5 °C/m
[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum permissible point gripping error according to ISO 10360-2